The PF22.2 Foam Cannon from Veloci (MTM Hydro), manufactured in Italy, is recognized as the leading product in the foaming industry, known for its reliability and efficiency. Featuring a newly designed wide-mouth, quick-disconnect bottle, it’s easy to fill and use. Whether you're washing your car on the weekend or tackling large-scale jobs like cleaning a hog barn, this foam cannon saves both time and money. Simply attach it to your pressure washer using one of the included fittings, fill the calibrated bottle with your preferred chemical mix, and you're ready to go.

The PF22 offers adjustable fan blades and a two-stage nozzle, allowing you to spray foam vertically or horizontally. By adjusting the fan (narrow or wide), this foam cannon delivers a thick layer of foam to surfaces like vehicles, buildings, fences, sidewalks, or roofs. The top-mounted chemical injection knob lets you precisely control the amount of chemical drawn through the chamber, allowing you to adjust the foam density. Thanks to its internal agitator, the PF22 produces a denser, stickier foam than many competitors, which clings to surfaces longer, giving the chemicals more time to break down dirt and grime. While some surfaces may still require scrubbing, the effectiveness of the foam minimizes the need for extra effort.

This Kit Includes:
*Italian Nickel Plated Brass - Single Cast Foam Cannon Body
*Italian Calibrated 32 oz (1L) wide mouth bottle and bottle adaptor
*1/4" x 9" tube for drawing chemical
*3.5 Orifice (1.25mm) installed in foamer body
*3.0 Orifice (1.1mm) included with kit
*Fitting pack (2-pieces) containing a 1/4" M22 adapter and 1/4" QC Plated Steel Plug
*Manual with care instructions and exploded view

Check out this new video for assembly instructions.

Note from Veloci: The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice.