Pressure Washer Oil Burner Fuel Nozzles for Becket, Wayne Oil Burners
Fuel nozzles found in most hot water pressure washer oil burners
have three main characteristics. The first is the flow rate
, measured in gallons per hour. This can range from .5 gph to typically no more than 6.5 gph. The second is the spray angle
, which can be 30°, 45°, 60°, 70°, 80° or 90°. Lastly, the cone type
is a key characteristic of these nozzles. Type A nozzles have a hollow fuel cone, while type B is a solid cone.HOLLOW-CONE TYPE A
Hollow-Cone Type A nozzles are mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 gph. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.SOLID-CONE TYPE B
Solid-Cone Type B nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates, particularly above 8.00 gph. Type B nozzles provide smooth ignition and efficient combustion, particularly in larger burners.
Pressure-Washer-Parts.com carries oil burner fuel nozzles from Delavan Spray Technologies
. Delavan has been designing and manufacturing nozzles for the oil heating industry for over 60 years. They are recognized as a worldwide leader in spray nozzles for combustion applications from domestic heating to commercial boilers.